Replacing a GLX rod (what with?)

[chavez]

I have one last GLoomis rod to sell off to complete the Kistler only transformation. It's an MBR783C GLX rod (Weibe reel seat, 6' 6" MH Fast 10-17lb line weight and 1/4oz to 3/4oz lure weight) .

I already have a HE69APC that has replaced the two MBR783C rods I had for larger resevoirs but a shorter rod for fishing smaller waters like ponds and small lakes would be nice. Does the HE63APC sound like a good replacement or would the HE66MHC be better? I'll be pitching a 4" or 5" Senko or 3.5" GYCB tubes most of the time.

On the other hand, I don't own a "flippin" stick and have thought about getting a HE76HC or HE70HC.

What would you choose if you were in my situation?

[TTCal]

Chavez...

GET THE He76HC !!!

lol - in all seriousness, I think you'll find the He69APC fine for smaller reservoirs as well, so why not support a technique or range of rods you don't currently own, rather than duplicating something you already have? The He76HC is a very versatile rod and together with the He69APC can cover a range of techniques and applications.

I will soon on two fo each myself!

[chavez]

[TTCal]

Chavez,

I used to be a light line kind of guy too and still am to a certain extent, however the water I fish these days has a lot of weeds, AND the occasional surprise HAWG - so I've learned to switch tactics by fishing the thinner diameter but heavier test superlines. I find it a nice compromise though I'm still searching for the right superline for me. I thought I had found it in Berkeley Fireline, but I'm second thinking my choice now.

In anycase, I pitch and cast Senko's with my He76HC on occasion with 14lb fireline, and wouldn't hesitate at all to do the same with 10 and maybe even 8 lb mono. I find this rod that outstanding. But of course, you already know this! heh heh

[Lightninrod]

I just got my new HE76EHC so I voted also for the HE76HC. I fish in a 7-10 acre swamp pond with all kinds of cover/snags above(and below) water. All my rods are 7 footers(except for one 61/2' 'old' rod and the new 7/6) and I fish out of a 10X4' Basshunter with 8 rigs. A 7', 6" rod is not too big for small waters. I pitch/flip with my new rod and will also use it for swimbaits and C-rigging. Get the longer rod 'cause size does count .

Dan

[Lightninrod]

"I'm still searching for the right superline for me. I thought I had found it"

sde: I know you're referring to braided line for a "superline" but IMO, [-- login to view link --] that line is better than any braid as long as you're not throwing a topwater bait with it. It is almost(?) as tough as a braid. It's as sensitive. Plus it has at least two advantages/superiorities to braids: it's almost invisible(similar light index to water) and.................it won't wrap around your rod tip when slack is thrown into it. I've used it for a few years in 15 or 20# test on all my rigs except the t/w ones.

Dan

[TTCal]

Hi Dan,

thanks for the suggestion... I'm familiar also with flourcarbon lines. I've used P-Line Flouroclear and think it's ok, though a little wiry. I may give this Seagar stuff a try just to see too. Right now, I'm using Fireline by Berkeley which they say is not a pure braided line, that's why I refer to it as a "superline" - there seem to be some hybrids of that as well.

All in due time Lucky I have an electric line spooler!!

regards,
SD

[Highestgauge]

I also use the P-line flouroclear. I use it on all my reels (baitcasters) unless I'm in the thick stuff. I use braid for thick mats and pads. I highly suggest using the "reel magic" on the flouroclear and that seems to keep the line soft. The only thing I would suggest is to check the line frequently...I think that goes for most lines .

Mike

[TTCal]

Thanks for the tip HG, I'll keep it in mind. Never thought of using something like that on the lines themselves. And of course, having "grown up" using the Original P-Line, I ALWAYS check my line for little knicks or abrasions and retie often as a rule - except when using a superline guess I should change that up a little.

But back to the topic of this thread... Chavez, decide on your replacment pole yet?

[chavez]

[Lightninrod]

LC: I just got my first spool of Sufix DNA(in 17# test) for one of my 2 topwater rigs. I havn't thrown it enogh yet but it fit's your description as best I can tell.

Dan

[chavez]

Well, got the He76HC (and a He70MC) today and it's a nice rod! Lighter than I would have guessed for a heavy action 7' 6" rod.

When I got home, I put a Metanium Scorpion reel on it and tied on a 3/8 oz jig and pitched it around the yard. Wow! After a few practice pitches I was able to pitch it accurately to 40 ft. Probably could do 45 ft if I really tried or with a heavier jig. That's pitching standing up (gotta see how I do sitting down in the kayak). I'm sure the extra length allows me to get the extra distance.

I also two-hand cast around and it shoots that jig like a cannon!

I'm pretty pleased with the choice. Thanks y'all!

[TTCal]

congrats Chavez... great choices..

[Larry]

I am using the He63 rod for spinnerbaits and it handles the job well. I like the shortness of the rod when in close to objects. Last weekend I would throw a Calif Series rod and then pick up the He63...the feel of the Helium rod is unbelieveable.

In the past I have felt the Calif Series rods were the proper tool for horizontal presentations...and they do a good job...but now I am switching completely to all Heliums...

[TTCal]

Larry,

Next time you get a chance... try using your He69APC for spinners and when you get in close to a target, just pitch to it. The softer tip on the He69APC is simply incredible for casting spinners with distance and accuracy.

SD